1. Home
  2. Building Automation and Controls
  3. HVAC Controls
  4. Thermostats
  5. Single Temperature Low Volume Output Thermostat for Ceiling Terminal Units
Single Temperature Low Volume Output Thermostat for Ceiling Terminal Units

Single Temperature Low Volume Output Thermostat for Ceiling Terminal Units

T-4110 Series

Single Temperature Low Volume Output Thermostat
for Ceiling Terminal Units

Contact Us

Product Overview

The T-4110 Thermostat is a low volume output, single-temperature thermostat designed for mounting in ceiling terminal units.

Features

  • Mounts in: Room air sampling chamber
  • Mounts in: Return air grille
  • Mounts in: Diffuser, when equipped with an optional protective cover which incorporates an aspirator to power the thermostat from duct air pressure
  • Available as Direct Acting (DIR) or Reverse Acting (REV) models
  • Features a long, flexible, plastic lever connected to its set point adjuster, which extends through the ceiling or diffuser, allowing adjustment from inside a room
  • Sensitivity Adjustable from 1 to 3 psig/°F (12 to 38 kPa/°C)
  • Factory set at approximately 2.5 psig/°F (32 kPa/°C)
  • Flow Capacity 45 SCIM (12 mL/s) with .007 in. Restrictor 25 SCIM (7 mL/s) with .005 in. Restrictor
  • Air Consumption 45 SCIM (12 mL/s) or 25 SCIM (7 mL/s) depending on Restrictor 
  • Supply Pressure 13 to 25 psig (91 to 175 kPa) nominal 20 psig (140 kPa)
  • Flexible Set Point Lever Range 66 to 82°F
  • Air Connections Two, Control and Aspirator

Resources

Catalog Page

Download specs

View

Back

Next

Contact us